Wall Mounted Fixing Clamp (Side-Grip Jaw)

Product Description

Simply loosen the small grub-screw in the main body to remove the inner fitting. Then you need to drill a fixing hole in the wall and screw the inner fitting in position.

Then you need to slide the outer body over the inner fitting and rotate it, such that the jaw is aligned either vertically or horizontally (depending on whether you're supporting sign panels or 6mm diameter rod), and then simply re-tighten the grub-screw to lock the outer body to the inner fitting.

Typically you'll need to use 4 of these clamps per sign panel, but maybe 6 if the panel's length to thickness ratio requires extra support.

When mounting rod to the wall, you'll need one clamp every 500mm approximately.

• Multipurpose clamp ideal for rod or panels: the side-grip jaw makes this clamp suitable for various applications, including acrylic poster holders and display units, sign panels manufactured from Foamex and other POS materials, and much more.

---